Free Web Hosting by Netfirms
Web Hosting by Netfirms | Free Domain Names by Netfirms

DATASCAPE

 

IC-M3A VHF MARINE TRANSCEIVERS

IC-M3A
IC-M3EURO

Reliable communications made easy

Water-resistant eenstruction*
Sea spray? Rain? No need to worry with the IC-M3A. Water-resistant, non-corrosive construction, including water-tight gaskets for the control knob and antenna connector, ensures reliable communication out on the water.
*Equivalent to JIS water protection specification 4.

Simple operatien
Well spaced, clearly labelled buttons on the front panel provide easy one-hand access to frequently used functions. The simple push of one button controls each function. Channel selection is a snap with the up/down keys.

Large LCD with backlighting
The extra large LCD shows operating status at a glance. Superior contrast and backlighting make viewing easy on your eyes, And with key backlighting, operation at night is not a problem.

'Tag' scan system
Icom's 'tag' scan system makes scanning easy __ add or delete channels at the push of a button.

Alkaline battery ready
Alkaline batteries can be used as a convenient backup to rechargeable Ni-Cd batteries. While you're charging your Ni-Cd's throw in some alkaline batteries for temporary operation. Keep an extra set of "AA" alkaline batteries on board for emergencies.

5 W output power
When using Ni-Cd batteries the IC-M3A produces a powerful 5 W of output power.

Other features
bulletOne-touch selection of channel 16 and channel 9
bulletDual watch and tri-watch-monitor channel 16 while operating on another channel or monitor channel 16 and channel 9 while operating on another channel
bulletReceives weather channels and has a weather alert function that alerts you to emergency NOAA broadcasts
bulletCompact size

SPECIFICATIONS

 GENERAL
Frequency range : Tx 156.025-157.425
  Rx 156.025-163.275 MHz
Usable channels : All USA, International and Canadian channels plus 10 weather channels*
  *USA verslon only
Mode : 16K0G3E (FM)
Power supply requirement : 7.2 V DC (negative ground)
Current drain (at 7,2 V DC, typical)
: Tx   at 5 W
  at 1 W
  1.6 A
  0.7 A
: Rx   max. audio
  standby
  power saved
  230 mA
  60 mA (squelched)
  20 mA (average)
Operating temperature range : -20°C to +60°C; -4°F to +140°F
Frequency stability : ±10 ppm (-20°C to +60°C)
Dimensions
 (projections not included)
: 58(W) × 140.5(H) × 43.5(D) mm
  2 9/32(W) × 5 17/32(H) × 1 23/32(D) in
Weight : 410 g; 14.4 oz
 TRANSMITTER
Output power(at 7.2 V DC) : High 5 W    Low 1 W(3/1 W Italy, 1/0 5 W France, Holland versions)
Modulation system : Variable reactance modulation
Max. frequency deviation : ±5.0 kHz
Spurious emlsslons : Less than -65 dB
Microphone impedance : 2 k
 RECEIVER
Receive system : Double-conversion superheterodyne
Intermediate frequencies : 1 st   31.05 MHz
  2nd   450 kHz
Sensitivity (at 12 dB SINAD) : 0.25 µV typical
Squelch sensitivity : 0.25 µ typical
Intermodulation rejection : 70 dB typical
Adjacent channel selectivlty : 70 dB typical
Spurious response rejection ratio : 70 dB typical
Audio output power : 500 mW typical at 1 0o54o dlstortlon with an 8 load
Audio output impedance : 8

The IC-M3A meets MIL-STD requirement and strict environmental standards for shock (MIL 810C, D, E) and vibration (MIL 810C, D, E)

Supplied accessaries
bulletBattery case W/NI-Cd cells
bulletAntenna
bulletBelt clip
bulletWall charger*
bulletHandstrap
* dependlng on verslon
All stated speciflcations are subject to change without notice or obllgatlon.

OPTIONS
bulletBP-204 BATTERY CASE
Takes 6 R6(AA) batteries Both alkaline or NI-Cd batteries can be used. The same as supplied,

bulletCP-12L CIGARETTE LIGHTER CABLE WITH NOISE FILTER

bulletOPC-254L DC POWER CABLE
Allows you to charge the transceiver through a 12 V cigarette lighter socket with the CP-12L or OPC-254L, respectiveiy.

bulletBC-131A WALL CHARGER
Regularly charges NI-Cd batteries in the BP-204 The same as supplied with the USA version

bulletBC-110D/V WALL CHARGER
Regularly charges Ni-Cd batteries in the BP-204. The same as supplied with some versions.

bulletMB-68 BELT CLIP
Allows you to attach the transceiver to your belt, etc. The same as supplied.

bulletMB-74 BELT CLIP
Alligator type. Clips almost anything in a variety of convenient places.

bulletAD-98FSC ANTENNA CONNECTOR ADAPTER
Allows you connect a BNC-type antenna.(For maintenance use only)



HOME Up

Page designed around IE6 with display size 1024x768

  
Copyright © Tim Musto

Last modified: October 20, 2006